200A double-pass pipe fittings, and pipe Blocks to achieve single and two-way conversion. Single-pass way which is similar to casing joint function, another way to connect the elbow-type lightning arrester (increased over-voltage protection), or for changing the wiring box change.The product is mainly used in American box changed, outdoor ring network switch cabinet and other high-voltage electrical equipment connected to common cable attachments are: the elbow-joint, elbow-type lightning arrester and casing seat.The use of high quality EPDM rubber insulation, double-pass tube structure within the advanced design ensure that when the elbow-joint off the normal arc.Unique design ensures a double-pass anti-reverse rotation casing joints to be installed without affecting the appropriate connectivity.
The main parameters | ||
Rated voltage | 25 | 35 |
Maximum phase voltage | 26.3 | 36.6 |
The maximum relative voltage | 15.2 | 21.1 |
Voltage Withstand | 54/1Minute | 117/5Minute |
15 minutes neglect.the | 78 | 104 |
Lightning shock pressure | 125 | 150 |
The minimum corona starting voltage | 19 | 26 |
The main parameters | Explain |
Rated Current | 200A |
Breaking current | 36.6KV,200A,Operation 10 |
Short-time withstand current | 10KA/0.17S |
3.5KA/3S |
1, insulation layer: high quality, special treatment of the EPDM rubber insulation products enhanced electrical performance2, torque limiter: According to the installation needs, you can adjust the double-pass 360 ° direction3, outside the semi-conductive layer: conductive rubber prefabricated EPDM meet IEEE592 standards4, copper joints: special treatment of the copper connector5, yellow positioning ring: Display products are installed in place6 Arc Room: Cable connector plug operation, effectively eliminate the impact of the product arc7, thread interface: 3 / 8''-16 threadEight, lock slot: high strength, high temperature resistant material of the cable connector firmly in the double-pass on
STT-0-200 Cable Accessories