10kv outdoor heat shrinkable termination are designed for 1 and 3 core XLPE power cables. Product Introduction:

10KV outdoor heat shrinkable terminations are designed for 1 and 3-core XLPE power cables. The whole set contains heat shrinkable insulation tubes,stress control tubes,breakouts, sealing tubes, phase color tubes, voil filler, shed and 3-hole shed.Its unique patented water-proof design ensures the higher security of cable accessories. 

Its high permittivity material endows it unique stress control system. And with compact design and few components, this product is easy to install, minimal waste for disposal. Fast, consistent installation means lower installing costs. Installation environment: use of torch adds flexibility to cable preparation in any climate. It also has high reliability. Heat-activated seals ensure maximum protection against moisture ingress. Lightweight construction requires no additional support. UV resistant, non-tracking outer tube for long life, even under adverse conditions. It also has excellent mechanical robustness.

Characteristics:

1.Operating Temperature:-40 degree - 110 degree;

2.Shrink Temperature:90 degree;

3.Waterproof, RoHS compliant.

Technical Data:

PROPERTY		TEST CONDITION AND TEQUIREMENT		RESULTS
AC withstand for 1 min.(wet withstand, for outdoor termination)		No breakdown and flashover shall occur at 45kV, 1min		No breakdown and flashover occurred on the combi.sample at 45kV, 1min
Partial discharge		13kV, ≤20PC		13kV, ≤20PC
Load cycle		Heating for 5h, cooling for 3h. Conductor's temperature is 95, 3 cycles		Conductor's temperature is 95. Results refer to the following test
Impulse voltage withstand 1.2/50us±10times		10 positiVe and 10 negative impulses at 105kV, flashover 1 time is allowed but not including total testing times		No breakdown of the combi.sample occurred at 105kV
DC voltage withstand negative 15 min.		No breakdown and flashover shall occur at 52kV		No breakdown and flashover occurred on the combi.sample at 52kV, 15min
AC voltage withstand, 4h		No breakdown and flashover shall occur at 35kV, 4h		No breakdown and flashover occurred on the combi.sample at 35kV, 4h
Oil-seal up test		Heating for 24h, cooling for 24h. Conductor's temperature is 65, oil pressure: 100MPA		No leaking, no seeping
(Only for Paper insulated cables)

10KV outdoor Heat Shrinkable Termination