1,Tilt-mould movement 2,25-30 cyles/min 3,quick tool change 4,automatic ejecting and stacking 5,gear box

Design Features

TF70 Tilt-mold Thermoforming Machine is a combination of mechanical,electrical and pneumatic components,and the whole system was controlled by micro PLC.The forming device with the 4 cam-controlled toggle lever system ensures high forming and punching forces.The tilting movement makes an automatic stacking and ejecting of the products.The machine has man-interface operation,sending sheet by chain,cutting by mould knives,and overturnd mould can automatic stacker products.Combines the preheating, material  feeding,heating,drawing,forming,cutting and stacking into one process.

Appilication

It is suitable to form PP,PS,HIPS,PVC,PET plastic sheets,which can be widely used to produce all kinds of plastic boxes,containers and other plastic wares,such as ice-cream cups,milk cups chocolate package boxes,candy boxes and fast-food boxes etc.

Specification   

 

Maximum forming area	260x680mm
Maximum forming depth	120mm
Maximum width of sheet	700mm
Thickness range of sheet	0.3-2mm
Maximum sheet roller diameter	1100mm
Air pressure	0.7Mpa
Air consumption	3000 (Liters/min)
Water consumption	300 (Liters/min)
Heating power	90Kw
Main motor power	11Kw
pre-drawing motor power	5Kw
Feeding motor power	3.5Kw
Rewinding motor power	0.55Kw
Maximum speed	33/min(cycles/min)
Power	3x380V+N+PE(±10%)50Hz

Fully Automatic Plastic Thermoforming Machine