The details of pet highly efficient multi-cavity automatic plastic bottle blow molding machine:
Suumary of the machine
Adopted nowadays most advanced blowing-bottle technology, Henggang company researched and developed HGAS-9C linear fully automatic blow molding machine which is high-speed, energy-saving series fully automatic PET blow molding machine.
The machine is featured by high automation intelligantization, reliable and stable performance, simple structure, high efficiency, low power consuming, high speed, and other characteristics. In process of production, owing to separating human from machine, that helps reduce intermediate secondary contamination, and ensures the product quality. And therefore, the machine is wildly used in manufacturing mineral water, beverage, food, cosmetic, pharmacy, and other PET containers.
Preform material:PET
Advantages of HGAS-9C water bottle plastic bottle blowmolding machine:
1. Controlled by man-machine interface, it is easy to operate. The whole machine is controlled by computer, including the control of temperature adjusting, the quantity of preform loading.
2. The precess of arranging preforms, uploading preforms and picking finished bottles is automatically finished by manipulator which is made of stainless steel, as well as the quantity of the preform uploading is automatically controlled according to the the quantity in preforms hoppers that helps to avoid the contamination.
3. The device of cycling cooling water protects the neck of preform to avoid deforming during being heated.
4. Then automatic mutual feedback and close-loop adjusting system are adopted in heating tunnel of constant temperature structure, make it outputs constant power pro rate and avoid be affected from the voltage fluctuation. The perfect preform-heating system, the state of the short step and coordination structure in preform-convey chain achieved not only the effect of heating slowly, energy consumption slow, but also ensure the preform heated evenly, blown easily.
5 The mold could be changed within one hour because of assembled in the fixed position.
The important components( such as electric pneumatic, hydraulic, and reducer and so on) are from the top brand imported from Euro-America, Japan, to ensure the reliability and life-span.
Maintain convenient
Owing to the special cable connected with PLC and machine, user controls all actions of machine through PLC. Once the machine with problem, user will get the alarm signal and failure dagnosis report provided by the PLC, then the user could easily found the fault and clear the fault quickly.
Safety
HGAS-9C item fully automatic PET blow molding machine is furnished the following perfect protect device in mechanism and electric system to ensure the operator safety and the machine operating in long time and in stable state.
1,The operator's safety
The entirely close structure and perfect reliable safety doors system ensures the operator's safety.
2,The machine's safety
The multi-spot detect technology adopted protects the safe operation of allocation system, mold-closing system, and stretching system.
The techincal parameters of pet plastic blow molding machine:
Item | HGAS-9C | |
Molding | Clamping Stroke | 120mm |
Stretching Stroke | 240mm | |
Bottom Stroke | 60mm | |
Preform Distance | 76mm | |
Cavities | 9No. | |
Clamping force | 65000kg | |
Container | Max. Container Volume | 1.5ltr |
Neck Diameter Range | 18-38mm | |
Max.Container Diameter | 68mm | |
Max. Container Height | 240mm | |
Theoretical Output | 10000bph | |
Electrical System | Heating Pitch | 50.8mm |
Number of lamp | 144pcs | |
Max. Heating Power | 113kw | |
Heating Power | 56kw | |
Using power | 64kw | |
Total power | 128kw | |
Air System | Operating Pressure | 8-10 kg/ cm2 |
Low Air Consumption | 1500ltr/min | |
Power consuming | 15kw/hr | |
Blowing Pressure | 30 kg/ cm2 | |
High Air Consumption | 5000ltr/min | |
Power consuming | 55kw/hr | |
Chiller Water | Operating Pressure | 3 kg/ cm2 |
Temperature | 5-20°C | |
Flow Rate | 77.1ltr/min | |
Consuming | 23100kcal/hr | |
Cooling Water | Operating Pressure | 3 kg/ cm2 |
Temperature | 18-37°C | |
Flow Rate | 91.4ltr/min | |
Consuming | 4700kcal/hr | |
Machine | Size(L×W×H) | 4200X2000X2500mm |
Weight | 7200kg | |
Machine | Size(L×W×H) | 6400X3300X2500mm |
Weight | 8000kg |
The picture of mineral water plastic bottle blow molding machine:
Product picture:
highly efficient automatic plastic bottle blow molding machine