Plastic Injection Molding Machine
Applications of plastic injection molding machine
The screw-designed optimum injects with minimized aldehyde content. Advanced plastizing quality. Some units'structures are improved optimum to make production efficient higher.
Main Technical Standards of plastic injection molding machine
Model | JND1680 | JND2280 | JND2680 | JND3280 | JND3980 |
INJECTION UNIT | |||||
Screw Diameter (mm) | 50 | 60 | 70 | 75 | 80 |
Screw L/D Ratio (L/D) | 25 | 25 | 25 | 25 | 25 |
Shot Size (Theoretical) (cm3) | 491 | 780 | 1100 | 1502 | 1689 |
Injection Weight(PET) (g) | 520 | 826 | 1166 | 1590 | 1788 |
Injection Rate (g/s) | 175 | 273 | 380 | 350 | 446 |
Plasticizing Capacity (g/446s) | 30 | 49 | 60 | 71 | 70 |
Injection Pressure (Mpa) | 128 | 147 | 147 | 146 | 152 |
Screw Speed (rpm) | 0-150 | 0-180 | 0-190 | 0-160 | 0-165 |
CLAMPING UNIT | |||||
Clamp Tonnage (kn) | 1680 | 2280 | 2680 | 3280 | 3980 |
Toggle Stroke (mm) | 430 | 480 | 550 | 670 | 700 |
Space Between Tie Bars (mm) | 460x460 | 510x510 | 570x570 | 660x660 | 720x720 |
Max. Mold Heigh (mm) | 480 | 550 | 600 | 680 | 800 |
Min. Mold Heigh (mm) | 180 | 200 | 230 | 240 | 280 |
Ejector Stroke (mm) | 120 | 140 | 150 | 160 | 160 |
Ejector Tonnage (kN) | 40 | 65 | 65 | 65 | 110 |
Ejector Number (Piece) | 5 | 9 | 9 | 13 | 13 |
OTHERS | |||||
Max. Pump Pressure (Mpa) | 16 | 16 | 16 | 16 | 16 |
Pump Motor Power (kw) | 15 | 22 | 30 | 37 | 37 |
Heater Power (kw) | 13 | 16.5 | 21.5 | 23.8 | 24.8 |
Machine Dimension(LxWxH) (m) | 5.0x1.4x2.1 | 6.0x1.4x3.2 | 6.1x1.5x2.2 | 6.9x1.7x2.5 | 7.1x1.9x2.5 |
Machine Weight (t) | 5.4 | 6.9 | 8.0 | 12.0 | 15.7 |
Hopper Capacity (L) | 25 | 50 | 50 | 50 | 50 |
Oil Tank Capacity (L) | 250 | 320 | 580 | 730 | 750 |
Plastic Injection Molding Machine
Plastic Injection Molding Machine