Ads by Google
General Description:
A high performance, multipurpose, surface tolerant, two-component chemically cured epoxy semi-gloss coating for industrial applications. For use on properly prepared steel or masonry surfaces. Also used on concrete floors and interior primed drywall, plaster and wood surfaces. Use as a filler for open textured concrete block.
Typical Uses:
Ideal for structural steel, piping, tanks, and equipment in chemical, fertilizer, power plants, petroleum refineries, pulp and paper mills, water and sewage treatment plants and mining operations.
Advantages:
Excellent corrosion protection
Suitable for salt & fresh water immersion
Excellent solvent and chemical resistance resists
splash and spillage of solvents, alkalis, salts, moisture,
oils, greases, foodstuffs and detergents
Cold weather cure-Use cold weather additive for
application down to 25 F (-4 )
Surface tolerant abrasive blasting not required in
many applications
Excellent adhesion to tight rust
Low VOC
Self-priming on steel or masonry
Abrasion resistant
High build/high solids coating
Superior recoatability
Finish: Semi-Gloss
Color: off white
Reduction Solvent: CP-10 Thinner. For application over aged
alkyds use CP-5 Thinner
Clean-up Solvent: CP-10 Thinner
Weight/Gallon: 1.3 kg/L varies with color
VOC (EPA 24): 248 g/L
Solids By Volume: 71%
Theoretical Coverage at 1.0 Mil Dry: 28.0 M2/L
Shelf Life: 24 months at 77 F (25 ) unopened
Mix Ratio By Volume: 6(base):1(converter) see mixing instructions.
Induction: 15 minutes @ 77 F (25 ) see mixing instructions.
Pot Life: 5 hours @ 77 F (25 ) & 50% R.H.
Carpoly Multi-Purpose Epoxy Mastic Coating