1. high volume resistivity 2. resist to 600 C 3. excellent water, ageing and corrosion resistance

Main Features	High volume resistivity, room temperature is greater than 1012Ωm
	High dielectric strength (breakdown strength), more than 104KV/m
	Good chemical stability, water resistance, ageing resistance, corrosion resistance
	Resist to 600°C
Ingredients	inorganic - organic polymer, inorganic crystals,such as alumina, silicon nitride, ceramic particles
Solidification	1 hour at 200 °C, or 20 min at 250 °C
Note	1. After solidification, when using this coating for the first time(if the heating temperature is below 350°C), there will be a few residual volatile solvent odour. Later it would disappear.
	2. When coating, the thickness of each coating should not be thicker than 100μm, coat the next layer after the last layer solidifies. Each coating should not be too thick, otherwise it will affect the bonding force and the strength of the coating

electrical insulating paint