1. Output paper: High, medium and low grade toliet paper 2. Net paper width: 787mm-2880mm 3. Capacity: 1-10T/D

Output Paper	High, Medium and Low Grade Toliet Paper
Output Weight	13-40(g/m2)
Net Paper Width	787-1575mm
Productive Capacity	1-10(T/D)

1.     uses

Paper weight : 13-40gms,

Raw material : waste tissue paper, newspaper, printing paper

Finish paper: jumbo rolling tissue paper

2. crafts parameters:

1. Pulp : wood pulp plate, waste paper etc as raw material

2. Feeding pulp concentration : 0.3-0.9‰

3. beating degrees : 30-38°SR

4. paper sheet dryness

come out from wire case : 18-20%

Before go through MG cylinder : 36-40%

Come out from MG cylinder : 90-94%

Finish tissue : 90-94%

5. Lateral shrinkage : 8-10%

6. Day running hours: 22 hours

7. Papermaking rate : 94%

8. Yield : 95%

9. Touch roll line pressure: 40KN/m

10. other parameter

AC voltage : 380V, 50Hz

Control voltage : 220/24V

Water pressure : 0.25Mpa; working pressure: 0.2Mpa

Compressed air source pressure : 0.6Mpa; working pressure : 0.4Mpa

Steam pressure : 0.6Mpa ; working pressure: 0.3Mpa

Vacuum suction tank : 20-40Kpa

Water requirement : pure color, remove impurities, PH value 6.8

3.     main technical parameters:

1. Papermaking quantitative: 13-30g/m2 high wrinkles toilet paper

2. Net width of paper :1575

3. Designed speed : 210m/min

4. Working speed: 170-190m/min

5. Nominal capacity : 3-5T/D

6. Base plate distance : 240mm

7. Wrinkling rate : 22%

8. Transmission : Y-type  AC motor drive partly, frequency control

MG cylinder motor : 37kw

Roll-cylinder motor: 3kw

9. Arrangement : single-layer , the left and right hand arrangement

 Best service:

We will provide you all technical consultation and make the draw and proposal for you.We will send technicians to install and test the machine for you.We will train skilled workers for you.We will supply best after-sale service.

787-1575 Environmentally type Tissue Paper Making Machine