Ads by Google
BEST -- 1 3 0 0Model Paper Slitting Machine
Main technical parameters:
1. Weight Range :50-400G
2.Slitting width :50-1050mm
3.Slitting diameter less than :1300mm
4.Finished products width: 50/200mm, Rolls diameter less than 1100mm,Cut face error : more or less 1mm, Roll Elastic consistent, end-flush.
5.Slitting width error :more or less 0.5mm
6.Machine speed :0-130m/min
7.Material allowed range :50-400g
8. The scope of winding finished:50 mm–1050mmwith machine there are14pcs cutter , Round knife is from Shanghai Shenlong Tool Factory (upper and lower knives can be arbitrarily)
9. Roll Take-up mode: use dual-income material shaft center winding, according to different requirements of arbitrary choice roll take-up. With removable inflatable shaft (3-inch inflatable axis 2 in the machine) (inflatable shaft prefer to use German technology, Zhejiang Yafei power production).
10. Edge System: Configuration screw correction side / manual tracking devices to ensure accurate position can be controlled by the waste side of 3-8 mm or less. (Depending on different materials)
11. Unwinding section: use of extension units around regulation, inflatable solid tight to ensure the safe and convenient loading and unloading.
12.Discharge tension control: Using 20kg magnetic brake
13.Random configuration automatically credited “meter” devices, alarm,
parking etc, machine equipped with the safety signal and protective
covers, protective axis in order to ensure safety in production.
14.Host using 5.5kw frequency conversion stepless adjusting speed 0-130 m / min can be adjusted according to different materials. (use inverter Shandong Huifeng Electronics which with Taiwan technology,)
15. Machine with high-quality steel plate (30mm thick) and the channel structure, Linear bearing slide
16. Use 100mm diameter and surface treatment dynamic balancing roller.
17.Winding Part : use dual-torque motor control, rolling diameter less than 1300mm.
paper elimination machine