YD-C | |||||||
Machine Model | 1092 | 1575 | 2000 | 2200 | 2400 | 2600 | 2800 |
Raw Material Width | 1330 | 1750 | 1950 | 2150 | 2350 | 2550 | 2750 |
Finished Roll Diameter (mm) | Φ90~300 ((Tightness adjustable) ) | ||||||
Raw Material Diameter (mm) | Φ1100Φ1100 mm (Other sizes are available ) | ||||||
Raw Material Core Diameter | 76.2 mm Other sizes are available) | ||||||
Perforation(mm) | 90~160mm | ||||||
Speed | 180-200 m/min | ||||||
Rewinding | By air-shaft | ||||||
Embossing Unit | Single ply embossing, double ply embossing, steel to steel embossing | ||||||
Bottom Embossing Roller | Felt roller, Paper roller, Rubber roller | ||||||
Unwinding Unit | 1-3ply | ||||||
Calendering | Steel to steel, steel to rubber | ||||||
Pneumatic System | 3 HP air compressor, Mini pressure 5kg/cm2 Pa(Provided by client) | ||||||
Power | 4.5-11 kw | ||||||
Dimension(mm) (L×W×H) | 6200x2600x1800~6200x4000x1800 mm | ||||||
Weight | depend on the size and configure | ||||||
Option |
| ||||||
Embossing Unit | Single ply embossing, double ply embossing, steel to steel embossing | ||||||
Bottom Embossing Roller | Felt roller, Paper roller, Rubber roller | ||||||
Unwinding Unit | 1-3 ply | ||||||
Edge Embossing Unit | Option | ||||||
Calendering Unit | Steel to steel, steel to rubber | ||||||
Tail Suction Unit | Vacuum tail suction function, 1.5kw | ||||||
Tail Sealing Unit | Option | ||||||
Driving system | Frequency conversion speed regulator |
YD-C JRT tissue converting machine