Ads by Google
Characteristics
* Paper leading with Vacuum absorb model, have high-pressure & strong fan motor. The flow of fan can be adjusted, and have silencer; The electric control system fastens on a electrical case, which has min. 1.5meter distance from equipments, the operation side is completely independent.
* Gimble drive system, separated structure and independent drive case. Closed gear drive system with oiling lubrication, the usage life of the gears is highly prolonged.
* Machine base and wallboard is cast iron structure, thickness of the wallboard is 180mm.
* Corrugated Roll: Material of corrugated roll is 52CrMo alloy, which is dealt with quench, surface polish. Diameter of roll is Ø 320mm, surface hardness is more than HRC60. The adjust of up and down of roll is pneumatic controlled.
* Press roll: Diameter is Ø320mm, surface is worn down and chromeplated. The adjust of up and down of roll is pneumatic controlled, material is Carbon Iron 45#, dealt with confection.
* Pre-heater Roll: Diameter is Ø400mm, surface is worn down and chromeplated. All are connect with soft metal pipe.
* The bearing of corrugated roll and press roll are lubricated and high-temperature resistant.
* Glue supply and quit is pneumatic controlled, diameter of glue roll is Ø240mm, surface of roll has concave netted rind, surface polish & chromeplated. Surface of adjust roll is surface polish & chromeplated.
* Use electrical glue separate equipments, the glue part can run independently when the main motor stops, this can avoid the dry of the glue.(Choose by customer.)
* Middle height of corrugated roll is 0.10mm, middle height of press roll is 0.075mm. Have place limit equipment, diameter of tighten cylinder is Ø160mm.
Technological Parameters:
1. Working width: 1300-2200mm
2. Design speed: 120m/min.
3. Operation direction: Left or right (design as customer’s workshop.)
4. Steam pressure: 0.8-1.2Mpa.
5. Flute: UV or UVV model, can design as customer’s requirement.
Diameter of the rolls:
1. Corrugated Roll: Ø320 mm
2. Press Roll: Ø320 mm
3. Gluing Roll: Ø219 mm
4. Pre-heating Roll: Ø400-600 mm
Drive Power:
1) Main Motor: 7.5KW, 380V, 50HZ
2) Fax Motor: 5.5KW, 380V, 50HZ
Main outsourcing parts, materials and origin
Name | Brand & Origin | Material |
Wallboard and basement | Own factory | HT200 |
Wheel box |
| HT200 |
Revolving joint & metal soft pipe | Shandong Luguangqiu |
|
Main motor | Jiangsu Deyi | 11KW speed adjust motor |
Bearing | Shenzhen HWL |
|
Sealmaster | Anhui Qianshan, Wanshan brand |
|
High-pressure Fan motor | Own city |
|
Cylinder | Own city |
|
Electromagnetism valve | Tian Ao |
|
Drain Valve | Beijing |
|
Electrical elements | Delixi |
|
| Tian Ao |
|
Easy broken parts and Spare parts List
Name | Brand or Origin | QTY |
Vacuum sheet copper | Own Area | 2 sets |
Paper-moveable sheet of press roll | Own Area | 2 sets |
Gluing board | Own Area | 2 sets |
High-temperature-anti lubricate grease | Great Wall Brand | 1 drum |
Metal soft pipe | Shangdong Lu Guangqiu | Thick and thin 1set each |
Valve | Shandong |
|
Single Facer