1 It makes full use of underground space 2 Be equipped with guide device and balance device 3 Used chains to complete lifting;

Product Information

This system is one of the high space utilization systems, which is high speed, conventional parking,energy saving. It is able to provide 3-8 layers’ parking spaces, make full use of the ground and underground space .

System Features Introduction

 

1 This system is mainly used chains to complete lifting;

2 Standard design is three layers, including the use of an in-ground pit in order to retrieve stacked vehicles without the need for removing any other vehicles within the system. And the Entry/Exit is on the ground. Compared with the similar systems, it makes full use of underground space. This type is suitable for the squares, residential buildings and office building’s basement

3 A group of four cars are fixed in one frame, and four pots lift at the same time

4  Each group of parking pot can be operated independently

5 Building foundation in the parking place should have basement That the bottom without drainage ditch

6 Advantage: Equipment rise to stop the car and then put under the pit, the ground without the higher buildings, don't keep out    line of sight, shall not prevent the landscape, and the same as general parking place

7 Equipment with automatic drainage system(optional)can ascend automatically when the level of water alarming

Parking Planning

Each control region of the group can be designed between three-connected and ten-connected and the best-designed garage in each group is within 8 parking spaces. The plan can be constituted and designed flexibly as well.

System Security

Utilize four-point anti-fall device with independent stop block; overrun distance, speeding and overtime detector to ensure that the vehicles are accessed security. In addition, the in-ground pitis equipped with guide device and balance device.

application

 1 Generally be equipped on the ground parking place and Can be designd into two or three or four layer

  2 Can be used in the authority unit yard and the transformation of the original parking pot

 

 

Main Technology Dimensions
No.	Content		Introduction
1	Parking floor		upper	traverse	pit
2	Parking Specifications	length(mm)	≤5000	≤5000	≤5200
		width(mm)	≤1850	≤1900	≤1900
		height(mm)	≤1550	≤1550	≤1550
3	Testing load(kg)		≤1700	≤2000	≤1700
4	Lifting	power(kw)	2.2
		speed(m/min)	4
5	Sliding	power(kw)	0.2
		speed(m/min)	8
6	Drive Mode		Motor + Chain
7	Operation		Push Button Automatic Manual
8	Power		AC 380V/220V 50Hz 3ph 380V 220V 50Hz

    

 

 

 

JS-DP2Pit Lift-Sliding Mechanical Type Car Parking System