Welcome to ECVERY
Card dispenser
Card dispenser
Supplier Info
[China Supplier]
Contact Person : Mr. Li Wei
Tel : 86-0755-61110432
Fax : 86-0755-61110431
Product Detail
Automatic buzzer alarm when cards warehouse is full Automatic reset after the wrong alarm of 100S Card thickness: 0.2mm-2.4mm

1,Main characteristics

³     Industrial design, suit for automotive card dispensing equipment such as automotive card dispenser, road barrier and which in the car lots and so on.

³     Simulation manpower friction issuers, better adaptability to various deformed cards.

³     Watchdog of hardware and micro-embeded real-time operating system to ensure reliable operation.

³     Pre-dispense function accelerate dispensing speed

³     Directly connect to the inductor

³     Automatic buzzer alarm when cards warehouse is full

³     Automatic reset after the wrong alarm of 100S

³     RS232 and I/O voltage interface is offered;

³     The card dispensing mode can be choose; fitting for mul-channels card dispenser;

³     Adjustable capacity of card warehouse.

³     The card thickness can be adjusted within0.2mm-2.4mm (Ex-work setting:0.8mm);

³     Motherboard slip design makes the installation and removal simple, convenient and fast.

³     Die-wide production ensures the products` quality and consistency.

2,Main technical data

³     Operating voltage: 24VDC(MAX current2A, static current 0.1A)

³     Working temperature: -30°C to 70°C

³     Working relative humidity: 30-90%

³     Work condition: installed in bin  

³     width :54 ± 0.5 mm   length: 85 ± 0.5 mm

³     thickness: 0.2-2.4 mm(adjusted)(notice:EX-work: 0.8mm)

³     material:paper and polyester cards.

³     Net weight: 1.5Kg(including card block)

³     Dispensing time: about 0.5S

3, Control interface

This dispenser provides both I/O and RS232 interface of power level. PWL control interface is led by standard 12pin (2.54mm) socket CN3of the control board, RS232 control interface is led by the standard 3pin (2.54mm) socket CN7.

3.1 TTL control interface(CN3)

Pins

Signal Description

Pins

Signal Description

1

-24V

7

VD

2

+24 VDC

8

Callback

3

0V

9

OutOK

4

Payout

10

Lower

5

Reset

11

Error

6

0V

12

Empty

3.2 RS232 control interface

Pins

Signal Description

Signal Description

1

GND

Ground

2

RXD

RS232 receive port

3

TXD

RS232 send port

Card dispenser

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.