Ads by Google
| Typical Properties | |||||||||||
| Performance | ASTM Standard | Test | Unit | PA66-101 | PA66-G10 | PA66-G20 | PA66-G30 | PA66-201FR | PA66-G20-FR | PA66-G30-FR | PA66-M30 |
| Density | D792 | 23°C | g/cm3 | 1.14 | 1.23 | 1.32 | 1.34 | 1.25 | 1.54 | 1.45 | 1.46 |
| Tensile Strength | D638 | Mpa | 82 | 110 | 130 | 145 | 65 | 115 | 135 | 65 | |
| Tensile Elongation | D638 | % | 30 | 4 | 3.3 | 3.4 | 14 | 2.5 | 2 | 12 | |
| Flexural Strength | D790 | Mpa | 120 | 170 | 205 | 250 | 100 | 200 | 220 | 120 | |
| 120D Impact Notched | D256 | KJ/m2 | 40 | 11 | 12 | 13.5 | 10 | 12 | 13 | 9 | |
| Flexural Modulus | D790 | Mpa | 3000 | 5800 | 8500 | 9500 | 2900 | 7000 | 7200 | 3000 | |
| Heat Deflection Temp | D648 | 1.82Mpa | °C | 80 | 195 | 215 | 245 | 92 | 220 | 240 | 190 |
| Rockwell Hardness | D785 | R | |||||||||
| Molding Shrinkage | D955 | % | 1.2 | 0.5/0.7 | 0.5/0.7 | 0.5/0.8 | 1.1/1.3 | 0.5/0.8 | 0.6/0.8 | 1.4 | |
| Flammability | UL-94 | 3.2mm | Class | V-2 | HB | HB | HB | V-0 | V-0 | V-0 | HB |
| Molding Conditioning | Dryness Temperature 90-100°C,Dryness Time 3--4hr,Mould Temperature60--80°C,Molding Temperature220--275°C | ||||||||||
Reinforced with mineral PA66-M30