8 level electric shock+1 level vibration remote dog training collar    

 User’s Manual of  Remote Control Training Collar      Mode: E-304

Futures

1 The six different static impulse and the vibration call can adapt to the needs of different situations . It is safe for the pet.

2 The stretchable electrode and the static impulse which can penetrate the hair of the pet are comfortable for the pet to wear.

3 The strongest static impulse can quickly and effectively curb the improper deeds of the pet.

4 The vibration call can help the master communicate with the pet gently.

5 With the vibration induction switch in it, the receiver will be turned on or turned off automatically , which can prolong the life of the batteries.

6 The receiver uses an AAA battery only.

7 The soft remote controller antenna is anti-broken.

Preparation before using

1 Check that batteries are installed in the remote controller and the receiver.

2 Checking the remote controller: Press the buttons on the remote controller one by one, the indicator light will light. If the indicator light doesn’t light or goes dim, change the batteries.

3 Checking the receiver: With the vibration induction switch in it, the receiver will be turned on automatically upon shaking and then the receiver will be in the standby state. The receiver will be automatically turned off when it is in stillness for more than 2 to 3 minutes, so as to save the electricity.

4 Connect the collar and the receiver. Adjust the length of the collar so that it suits the neck of your pet best. Don’t make it too tight while the discharging point of the receiver can touch the neck of the pet.

5 Press the vibration button(the central button) on the remote controller , the receiver will vibrate . It can give some information to the dog by the fixed rhythm vibration and training .

6 There are six static impulse buttons on the remote controller ( one to six). When pressing it , the discharging point will release static . The discharging state can be checked by the testing light. The first button is the strongest one while the sixth button is the weakest . The static impulse has effect of punishing. The master can choose a appropriate static impulse degree according to the temper of the dog.

7 The static impulse of the collar is to curb the improper deeds of the pet. After each successful check, the master should let the pet know what should be done and what should not be done. After a number of training the pet will understand what its master likes and doesn’t like.

8 We suggest you give the dog weaker vibration before starting the static impulse. After a time of training, the vibration or the weak static can also curb the improper deeds of the pet effectively. The static impulse only acts as a menace that might be unnecessary most of the time.

9 Prepare some socks for the dog as rewards for good deeds. This will make better effect in the training.

Operational instructions

1 Open the insert buckle of the collar and put the collar round the neck of the pet. Adjust the tightness of collar. Don’t make it too tight while the discharging point of the receiver can touch the neck of the pet.

2 Most pets feel uncomfortable at first wearing the collar. Don’t use any of the functions at that time until you are sure that the pet has gotten used to the collar. The static impulse is to curb the improper deeds of the pet. Don’t use it casually or to make fun of the pet.

3 The static impulse can be strong or weak. Training the dog is to let it associate the static with the vibration. Reduce using the static gradually.

4 The strong static impulse is only used in emergency.

5 If you don’t use this product, take the collar and receiver off the dog and place them in a place without vibration, so as to prolong the lifetime of the batteries.

6 If you don’t use the collar receiver for a long time, take out the batteries.

How to change the batteries

1 Receiver: Take off the rubber bottom cover and you will see two batteries (model: AAA). Take out the batteries and install the new ones. Pay attention to the polarity of the batteries. Mount the rubber bottom cover and press it tight.

2 Remote controller: The battery cell cover is at the lower part of the back of the remote controller. Open the cover by pressing it following the direction of the arrow. Take out the battery (model:6F22 9V) , pay attention to the polarity of the batteries. Put a new one back and then close the cover.

3 The batteries used for this product are ordinary ones, which can be found in supermarkets and department stores. Please provide the correct model while buying them.

4 The lifetime of the batteries vary according as how you use the product. Since the remote controller only consumes electricity when you press the buttons to send signals, its batteries’ lifetime is usually more than one year. Upon receiving vibration, the receiver will be turned on automatically and be in the standby state. This will consume small amount of electricity. A frequent use of it will consume electricity quickly. Therefore you should often check the batteries by watching the indicator light. In order to prolong the lifetime of the batteries, when you don’t want to use the receiver, take off the collar receiver and place it in a place without vibration. You can also take out its batteries.

Notes for use:

1 At first wearing this collar, some pets will feel uneasy. Give the pet some time to get used to it. Don’t use the functions of this product until you are sure that the pet has gotten used to it.

2 With an automatic vibration induction switch in the receiver, the movement of the pet will automatically turn on the power of the receiver. When you don’t use it, place it in a place without vibration or even take out the batteries, so as to prolong the lifetime of the batteries.

3 By applying the digital audio transmitting technology in the remote controller, remote control signals can penetrate the obstacles in the front, therefore it is unnecessary for the remote controller to point directly at the receiver. However, obstacles will affect the valid distance of remote controlling.

4 The valid distance of remote controlling means the straight-line distance between the remote controller and the receiver without obstacles in between. If there are interference signals or signal screening around, the actual remote control distance may vary.

5 This product is for pet training. Only by training can the pet understand the intention of its master. Good effect can only be achieved by lasting use of it.

6 The static impulse is to be used to curb the improper deeds of the pet. You should not use this function continuously.

7 Presently, this product is the most effective and safest tool for training pet. Following the correct operational instructions, you can effectively train the pet and bring it no harm.

8 Don't immerse the receiver into the water for a long time. And you should keep the remote controller out of water.

E304 8 level electric shock+1 level vibration remote dog training collar