It is the perfect combination of the tilt rehabilitation and the lower limbs exercise.

XYQ-8

Technical parameter:

Power cord: AC 220V 50/60HZ

Total stepping time: 0-240Min

Step control speed: 0-60time/min;8 adjustable steps

Tilting angle: 0°-90°

Treatment time: 0-90Min

Interval time of tilting: 1-90s

Distance of rising and falling: 0-300mm

(500mm-800mm)

Extension angle of the bed: -10°

The adjustable length of the pedal: 0-150mm

The motion angle of the pedal:±15°

Technical Advantage:

The machine is microcomputer controlled.The first tilt and auto-stepping system in china, it is the perfect combination of the tilt rehabilitation and lower limbs exercise and training, active and passive exercise is available. The machine is applicable for the patient who is bedridden for a long term.Apply good quality of controller and motor-drivers, noiselessThe bed surface is moveable, Large LCD display, easy to operate.The tilting angle and the rising and the falling of the bed can be controlled, which is convenient to transfer the patient.The stepping speed and time are controlled by the micro-computer.Equipped with emergency stop handheld to make the machine safe and reliable.There is the electrical extensive foot pedal. And the bed length is adjustable. It could put pressure on the patient’s lower limb to prevent osteoporosis.The pedal can move up and down so that the patient can take ankle exercise.Large caster, easy to move, and can be locked tightly.

Tilting and Auto-stepping machine