UCP207 pillow block bearing skf 1.high quality 2.easy to be mounted 3.long life 4.high accuracy

UCP207 pillow block bearing ntn high accuracy

NTN pillow block bearing

Pillow Block Bearing is a mounted bearing which is used to provide load support for a rotating shaft with the mounting surface on a parallet line with the axis of the shaft.The selection of the appropiate bearings can be completed based on the shaft size and the requirement of radial and thrust load.Elongated bolt holes in the base or feet of the unit allow for some adjustment and it is easy to mount the pillow block bearing.

Whether original to the equipment or as a replacement or not will be the key in selecting the right pillow block with dimensions and measurments of pillow block bearings.The shaft diameter is matched with the approciate corresponding bore dimensions of the bearing unit.If a properly sized unit matching the shaft is selected, the bearing will easily slide onto the shaft and into position and ready to be secured by the locking device.Shaft height also be called backing height is determined by measuring the distance from the base (or bottom) of the pillow block to the center of the ring or shaft.At last, the distance between the bolt hole centers is taken from the center of one elongated bolt hole to the center of the other bolt hole of housing.Construction:Pillow Block Bearing Unit are comprosed of insert bearing installed in special housing.The spherical fit of the outside diameter of the insert bearing and the inside diameter of the housing accomodates misalignments.Material:cast iron,pressed steel, chrom steel , carbon steel,stai GCr15,and so on.Quality Certification:ISO9001:2000 system.Service:OEM service

UCP207 pillow block bearing ntn high accuracy

Mounting :

The method of mounting rolling bearings strongly affects their accuracy,life,and performance,so their mounting deserves careful attention.It is recommended that the handling procedures for bearing be fully investigated by the design engineers and that standards be established with respect to the following items:

1,Clearing the bearings and related parts.

2,Checking the dimensions and finishing of related parts.

3,Mounting procedures.

4Inspection after mounting.

5,Supply of lubricants.

  UCP207 pillow block bearing ntn high accuracy

UCP207 pillow block bearing ntn high accuracy