Welcome to ECVERY
Push on joint ductile iron fitting-flange socket
Push on joint ductile iron fitting-flange socket
Supplier Info
[China Supplier]
Contact Person : Ms. Chen Jing
Tel : 86-0516-87977737
Fax : 86-0516-87731905
Product Detail
1) Ductile cast iron fitting-Flange socket 2)Class K9/K12/K14 3)ISO2531,EN545,BS4772 4)T type and K type

  

1.Push on  joint ductile cast iron fitting-Flange socket produced according to ISO2531, EN545, BS4772, EN598, AWWA C110.2 and other standards.

2. Material: Ductile iron 

3. Inside with cement mortar lining / FBE coating ( fusion bonded epoxy coating)

4. Outside painting zinc and then plus bitumen / FBE coating.

5. Fittings: All flanged tee, all socket tee, flanged bend, socket bend, blank flange, flange bell mouth, collar and so on. 

Hydrostatic test:  
Norminal Diameter mmPressureTest time
≤300≥25 Pa≥15S
350-600≥16 Pa≥15S
≥700≥10 Pa≥10S
Mechanical properties:   
NameTensile StrengthElongationYield StrengthHardness
Ductile iron fittings≥420MPa≥5%≥300MPa≤250HB

Push on joint ductile iron fitting-flange socket

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.