Our products are made of good material and nice manufacture rolls,promise the machine high quality and long work life.

Drive cleat C & S C cleat former machine is the main connector and most important connector used in duct industry.  MEIFORMER company designed the very nice look forming machine based on advanced technical on abroad. Our products are made of good material and nice manufacture rolls. have Baldor motors, high precision needle-type bearing, heavy chassis plate, stong box, case hardened and ground roll shafts. It also have arc welded steel stands. Those design promise the machine high quality and long work life and save your cost.

Model	Motor(KW)	Capacity(mm)	Weight(KG)	Dimension(mm)	Shapes
LM-20	1.5	0.3-1.0	150	920x420x900
LM-22	2.2	0.5-1.2	250	1450x570x950
LM-20R	1.5	0.3-1.0	150	920x420x1000
LM-22R	2.2	0.5-1.2	250	1450x570x1050
LM-20CR	1.5	0.3-1.0  C<0.8	180	900x570x1000
LM-22CR	2.2	0.5-1.2  C<0.8	220	1250x570x1000
LM-20F	1.5	0.3-1.0	150	920x420x900
LM-22F	2.2	0.5-1.2	220	1250x570x1000
LM-20C	1.5	0.3-1.0	220	1000x600x950
LM-22C	2.2	0.5-1.2  C<0.8	180	900x570x900
LM-22D	2.2	0.5-1.2  C<0.8	250	1450x570x950
LM-22DR	2.2	0.5-1.2  C<0.8	300	1450x570x950
LM-22S	2.2	0.5-1.2  C<0.8	300	1600x580x950
LM-25	2.2	0.7-1.5	350	1650x570x900
LM-25R	2.2	0.7-1.5	400	1650x570x1050
LM-25C	2.2	0.7-1.5 C<1.0	350	1650x570x900
LM-25CR	2.2	0.7-1.5 C<1.0	400	1650x570x1050
LM-25F	2.2	0.7-1.5	250	1350x570x1000
LM-25DR	2.2	0.7-1.5 C<1.0	400	1650x570x950
LM-30	3	1.0-2.0	500	1650x570x950
LM-16R	1.5	0.4-1.2	150	550x550x800

Pittsburgh Machine-L20