Ads by Google
Concrete duct machine
Brief intruduction
| a) HF vertical extruding pipe-making machine is the ideal equipment to manufacture cement pipe. Reasonable design, reliable and simple operation, accord with state standard GB11836-89. |
| b) The machine can be produced different sizes of tubular products by change mould. |
| c) Machine frame: Maganese steel with China national standard. |
Advantages
| a) average wall thickness, smooth inner and outer wall, good impermeability, high compressive strength, low cost, firm and reliable tie-in, convenient construction, high efficiency and release the mold immediately to maintenance, etc. |
Available raw materials
| sand, gravel, stone chips, fly ash and slag mixed with appropriate amount of cement. |
Applied Products
| connection tubes, small tubes and large tubes used in agricultural irrigation, urban water supply and drainage. |
Technical Specifications
| Overall Dimension : | 840×1700×4000 mm |
| Reducer rate : | 1:5.8 |
| Mould length : | 800mm |
| Cycle Time : | Moulding cycle: 5-10min(depends on the dimenstion) |
| Whole power : | 11.75kw |
| Motor Power : | 7.5kw |
| Mould diameter (inside mm): | 200mm, 300mm, 400mm, 500mm, 600mm, 700mm, 800mm, 1000mm |
| Wall Thickness: | 30mm for dia 200mm,300mm, 40mm for dia 400mm, 50mm for dia 500mm, 60mm for dia 600mm , 70mm for dia 700 , 80mm for dia 800mm, 100mm for dia 1000mm |
| Speed of main shaft: | 45 rolls / min |
Productivity(can change moulds)
| 30~100pcs / 8h |
Vertical concrete duct machine