Down Pipe Roll Forming Machine is composed of decoiling system, guiding system, forming system, cutting system, product supporting system, hydraulic system and control system. Curving Machine is for curving and offset the down pipe. It is mechanical control and automatic producing. The curving angle can be adjusted manually. We can design according to customers requirement.
1.Technical parameter
NO | Item | Parameters. | Remark | |
1
| Suitable material | Type | Pre-painted sheet |
|
Thickness (mm) | 0.5-0.6mm |
| ||
Yield Strength (Mpa) | 235Mpa |
| ||
Coil Width (mm) | 437mm |
| ||
2 | Producing Speed (m/min) | Variable 8-10m/min | Not including cutting | |
3 | Rollformer Main Motor Power(KW) | 3KW | Up to final confirmation | |
4 | Rollformer Hydraulic Station Power (KW) | 7.5KW | Up to final confirmation | |
6 | Total power | 10.5KW | Up to final confirmation | |
7 | Power | AC440V,60Hz,3 Phase | Up to final confirmation | |
8 | Dimension (L×W×H, m) | 16×1.1×1.2 | Up to final confirmation | |
9 | Main shaft material | 45(AISI1045) | Up to final confirmation |
What’s more, we can design it as per customers' requirements in terms of specification and configuration.
Down Pipe Roll Forming Machine