PPR Pipe Production Line 1. High speed singe screw extruder 2. ABB Inverter and Siemens electrical appliance 3. CE&ISO9001

Introduction:

The production lines are used to make the stabilized PPR pipes.This kind of pipes are PPR pipes wrapped by an aluminum foil, which makes the pipes having an excellent high creep resistance.And the thermo-expansion factor of the pipes is only 1/3 of the ordinary PPR pipes.Therefore, the pipes can be applied to inclement and changeable environment.

Perfect aluminum foil wrapping process,Perfect aluminum foil over-lap adhere technology,High performance PPR extruder,High operating reliability, yielding high quality pipes continuously,Precision aluminum foil wrapping tools based on know-how,Different aluminum foils can be used,Automatic control by touch-screen,NC control system based on PLC control,Can be extended to produce PE or PPR pipes

Main Technical Data

Model	SJ65/30-33	SJ75/30-33	SJ90X33
Pipe Diameter	20-63	20-110	20-160
Screw Size	65mm 30/33:1	75mm 30/33:1	90mm 33:1
Max Extrusion Speed	10m/min	12m/min	18m/min
Extrusion Output	120kg/h	220kg/h	350kg/h
Installation Power (KW)	58	85	200
Main Motor Power (KW)	37	75	132
Line Total Lenth	20M	25M	35M

 

 

Composition of complete line:

 

1	Mixer	1 set
2	Auto Loader & Hopper Dryer	1set
3	SJ65, SJ75, SJ90 Single Screw Extruder	1 Set
4	SJ25 Single Screw Co-extruder	1 Set	Optional
5	PPR Pipe Moulds	1 Set
6.	Vacuum Calibration Bath	1 Set
7	Water Spraing Bath	1 Set
8	Haul-Off Unit	1 Set
9	Printer	1 Set
10	Chipless Cutter	1 Set
11	Stacker	1 Set

PPR Pipe Production line