Equipment Advantages Extruder Screw and barrel are processed with Germany technology Made of 38CrMoAlA, nitriding processed

Equipment	Advantages
Extruder	Screw and barrel are processed with Germany technology Made of 38CrMoAlA, nitriding processed according to Germany standard. Nitriding thickness: 0.5-0.7mm, HV: 740-940 Surface: Ra ≤0.8um. The most advanced technology and equipment--Plasma bimetallic painting system is used to process the surface, prolonging the life. Barrel nitriding thickness: 0.5-0.7mm, rigidity: HV :940, inner surface roughness: Ra≤1.6um. The plasticization zone of the barrel is made of Japanese materials and tempered and quenched, prolonging the life.
Mould	Made of 40Cr, tempered, quenched and chromed Calibrator: premium abrasion-resistant copper, cooled by water Heater: heat-resistant Heating the inner mould with oil
Vacuum calibrating tank	Made of stainless steel Vacuum pump and water pump The tank is easily to move and adjust
Spraying tank	Made of stainless steel water pump The tank is easily to move and adjust
Haul-off	FUJI inverter
Cutter	FUJI inverter Non-dust
stacker	Equipped with limit switch to give fixed length cutting signal
Other equipments according to your demands

PPR Pipe Extrusion Line