Welcome to ECVERY
Lead-lined Drywall KW-RLD02
Lead-lined Drywall KW-RLD02
Supplier Info
[China Supplier]
Contact Person : Mr. Shao Tarzan
Tel : 86-531-66582009
Fax : 86-531-66582009
Product Detail
1) High sound-absorbent ability.2) Environmental friendly. 3) Energy saving.4) Dimensional stability. 5) Radiation-proof

Lead Lined Drywall (also referred to as lead lined sheetrock or lead lined gypsum) is supplied with lead lining bonded to 1/2" or 5/8" drywall. Custom sizes for lead lined drywall are quoted upon request. We also provide lead lining bonded to specialty drywall such as moisture and mold resistant board. Lead Lined Drywall (lead lined sheetrock, lead lined gypsum wallboard) is supplied with 2" strips of the same lead thickness and height and 3/8" diameter lead discs.


Lead Lined Drywall (lead lined sheetrock, lead lined gypsum wallboard) consists of a single unpierced sheet of lead laminated to the specified thickness of drywall. The bonding is accomplished with a continuous layer of mastic adhesive. We recommend using 5/8” drywall to support the extra weight of the lead.

The Lead Lined Drywall (lead lined sheetrock, lead lined gypsum wallboard) should be fastened at a minimum of 8" on center at the edges of each sheet, and at a minimum of 12" on center at the intermediate studs with normal drywall screws. 2" wide strips of sheet lead of the same lead thickness should be applied to each of the joint studs using a standard type of construction adhesive, prior to installing the Lead Lined Drywall (lead lined sheetrock, lead lined gypsum wallboard). These strips of sheet lead will provide the necessary 1" overlap with the adjoining sheets. Each fastener will be covered with a lead disc 3/8” in diameter and equal in thickness to the lead laminated to the sheetrock to eliminate the possibility of radiation leakage at the point of fastening. They should be applied using a fast drying construction adhesive. 

Refer to the drawings here for the typical methods of installing and fastening lead lined drywall. (lead lined sheetrock, lead lined gypsum wallboard)


Our lead can be laminated to most of your drywall requirements. Including, but not limited to the following:

Mold resistant wallboard Impact resistant wallboard Fire rated wallboard And virtually all USG, National Gypsum, Temple Inland and Georgia Pacific products

Radiation Protection Products also has leaded glass, lead bricks and neutron doors to assist you with all your lead shielding needs

Lead-lined Drywall KW-RLD02

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.