Welcome to ECVERY
semi-automatic PET bottle blow molding machine
semi-automatic PET bottle blow molding machine
Supplier Info
[China Supplier]
Contact Person : Mr. zhu jiaxun
Tel : 0086-0512-58665893
Fax : 0086-0512-58665892
Product Detail
semi-auto bottle blow molding machine 1.Capacity: 1500BPH 2.2 cavities 3.Semi-automatic 4.Bottle size: 0.2-2L

semi-automatic PET bottle blow molding machine

Application: PET mineral water bottle, beverage bottle, cosmetic bottle, medicine bottle, etc

Production Capacity: 1500

Max. Bottle Volume: 2L

Configuration: Mitsubishi PLC interface & touch screen, BURKERT solenoid valve, Festo pneumatic component, ABB transducer, OMRON sensor, Schneider electric component.

Automatic blow molding machine is designed uniquely with the innovative and reasonable mechanical structure. During the whole producing process, the bottles mouth faces down to avoid being overheated in the process of heating, which extends the application widely used. We adopt the cheap compressed air as driving power, applying the updated PLC technology to control automatically; presetting parameter, built-in self-diagnosis, alarm and LCD display function. Touch-screen is adopted human interface, friendly and visible which is easy to learn.

Preform up structure

The up one is to control the action of preform conveying structure. If there are too many preforms in the tunnel, the moving will be stopped; if not enough, it will get preforms automatically from preform conveying structure.

Heating tunnel

Preform heating structure is made up of three sets of heating tunnel in serials and one blower. Each heating tunnel has been installed with 8 pieces of far ultra red and quartz lighting tube which are distributed on each side of the heating tunnel.

Mould-closing device

It is located in the middle part of the machine and is composed of mould-closing cylinder, moving template and fixed template, etc. Two halves of the mould are fixed on the fixed template and moving template respectively.

PLC control system

PLC control system can watch on the preform temperature and if all the actions are finished according to the setting programs, if not, the system will stop automatically

to avoid fault expanding. Besides, there are fault reason tips on the touch screen

Blow structure

Thanks to adopting bottom-blow structure, the bottle mouth is always facing down to be prevented from the pollution of dust and dirtiness.

Air separation system

The blowing air and working air is separated from each other. . If the customer is able to use the clean blowing air, it will ensure the production of bottles clean at most.

Parameter

ITEM

UNIT

SPECIFICATION

Max. Capacity

BPH

2000

3500

4800

bottle volume

L

0.2~2

0.2~2

0.2~1.5

neck diameter

mm

28~30

28~30

28~30

bottle diameter

mm

110

110

100

bottle height

mm

335

320

320

mould opening

mm

150

140

150

mould cavity

Piece

2

4

6

space between two cavities

mm

128

190

190

clamping force

KN

150

300

450

length of stretching

mm

≤340

≤340

≤340

power

KW

16.5/10

24.5/16

33/22

temperature control section

 

8

8

8

voltage/phase/frequency

 

380V/3/50HZ

380V/3/50HZ

380V/3/50HZ

main machine dimensions

mm

2900x2000x2100

2950x2000x2100

4300x2150x2100

weight

kg

2600

2900

4500

conveyor dimension

mm

2030X2000X2500

2030X2000X2500

2030X2000X2500

conveyor weight

kg

280

280

280

Control Panel

Bottle Preform Loader

Heat Tunnel

Tidy

Blow molding

Lay off

semi-automatic PET bottle blow molding machine

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.