Ads by Google
HD-52A2 Full-automatic Oil Bottle Blow Molding Machine
1,Adopt automatic transmission control method to reduce staff, reduce costs, improve quality and profit.
and increase profits provide a guarantee. 2, We used imported man-machine interface control to make sure it has performance accuracy, strong stability, easy operation.
3, Detection devices made of imported components, high control precision, fast response.
4, We adopted infrared lamp heat, so the penetration, uniform heating, 40% electricity savings. The reflector width and height can be adjusted for different structures of the performs can be heated.
5, With automatic alarm and automatic fault detection to determine function.
6, We chose and used Germany, Japan, Taiwan, Korea, pneumatic components to make sure our product with high sensitivity and switching speed, low failure rate, safe and reliable operation.
7, The air route design: Action and blowing into two parts, to meet the blow, the action of different air pressure requirements for high pressure blowing products.
8, The unique clamping structure has strong clamping power. It is smooth, fast opening and closing mold, easy installation and replacement for mould.
9, the most critical is that we have a good after-sales service.
item | HD-52A2 |
Cavities | 2 |
Container Volume | 5L |
Clamping stroke | 190mm |
Mold thickness | 200mm |
Stretching stroke | 450mm |
Theoretical output | 1000bph |
Container diameter | 80-180mm |
Container height | 50-410mm |
Neck range size | 32-68mm |
Electrical volume | 380V/50-60HZ |
Total power | 26kw |
Working pressure | 18kw |
Blow pressure | 8bar |
Low air consuming | 30bar |
Low air consuming | 1.0m3/min |
High air consuming | 1.5m3/min |
Water Consuming | 20-30L/min |
Size(LXWXH) | 3.8m*1.6m*1.8m |
Weight | 2000kg |
Pass rate | >=99.6% |
HD-52A2 Full-automatic Oil Bottle Blow Molding Machine