BX-5000 Full automatic PET bottle blow molding machine is specially used to blow the 3-5L oil and water bottles.

Features of BX-5000 Full automatic PET bottle blow molding machine:

1.Stable performance with advanced PLC.

2.Conveying preforms automatically with conveyor.

3.Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.

4.High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area and eternal temperature in the preheater with an automatic thermostatic apparatus.

5.High safeties with security automatic-locking apparatus in each mechanical action,which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.

6.No contamination and low noise with the air cylinder to drive the action instead of the oil pump.

7.Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.

8.Strong clamping force with high pressure and double crank links to lock the mold.

9.Two ways of operating: automatic and manual.

10.Safe,reliable and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.

11.Low cost,high efficiency,easy operation,easy maintenance,etc,with automatic technological process.

12.Contamination is avoided for the bottle body.

13.Ideal effect of the chilling with the chilling system.

14.Easy installation and starting.

15.Low rejection rate:less than 0.2 percent.

Technical parameter:

ITEM		UNIT	BX-5000
CONTAINER	Max.container volume	L	5
	Max.neck outer diameter	mm	100
	Max.container diameter	mm	200
	Max.container height	mm	350
	Number of cavity	pcs	1
	Theoretical output	bph	500-700
ELECTRICAL	Max.heating power	kw	27
	Installed power	kw	28
COMPRESSED AIR	Operating pressure	Mpa	0.7
	Low pressure air consuming	L/min	1000-1200
	Blowing pressure	Mpa	<3.5
	High pressure air consuming	L/min	1200-1600
WATER CHILLER	Pressure	Mpa	0.5-0.6
	Temperature	degree	10
	Flow rate	L/min	30
MACHINE DIMENSION	Size(L*W*H)	m	2.2×1.8×1.9
	Weight	kg	2700

Full automatic PET bottle blow molding machine