No. | Item | Unit | Data |
1 | Dia of screw | mm | 40 |
2 | Screw L/D | 22 | |
3 | Shot Volume | cm³ | 200 |
4 | Injection weight | g | 142 |
5 | Injection pressure | Mpa | 175 |
6 | Max.screw stroke | Mm | 165 |
7 | Max.screw speed | Rpm | 10-225 |
8 | Heating capacity | KW | 7.5 |
9 | No. of heating zone | Qty | 3 |
Clamping&blowing system | |||
10 | Clamping force of injection | KN | 300 |
11 | Clamping force of blowing | KN | 70 |
12 | Platen stroke of mould | MM | 120 |
13 | Lifting height of rotary table | MM | 60 |
14 | Max.platen size L*W | MM | 360*240 |
15 | Min. mould thickness | MM | 180 |
16 | Heating capacity of mould | KW | 1.2-2.5 |
Stripping system | |||
17 | Stripping stroke | MM | 180 |
Driving system | |||
18 | Motor power | KW | 15 |
19 | Hydraulic pressure | Mpa | 14 |
Product range | |||
20 | Suitable bottle range | L | 0.005-0.8 |
21 | Max.bottle height | MM | ≤170 |
22 | Max.dia.of bottle | MM | ≤100 |
Other | |||
23 | Dry cycle | S | 4 |
24 | Min.air pressure | Mpa | 1.2 |
25 | Discharge rate of compressed air | M³/min | >0.8 |
26 | Water flowage | M³/H | 3 |
27 | Total rated power with mold heating | KW | 22.56 |
28 | Dimentsion | Mm | 3050*1300*2250 |
29 | Net weight | MT | 3.5 |
All the data may changed for improvements before sign the contract.
injection blow moulding machin 0.3-200M