Ads by Google
PET bottle 6-cavity blowing machine
The standard operation of SJ-A6 stretch blow molding machine includes four steps as follow:
Step 1. Put the preform into preform container and the conveyer will take the preform to orientation units automatically.
Step 2. Load the preform at neck up to preform holder, and then preform is conveyed into baking tunnel.
Step 3. After heating, preform is conveyed into the blow station, then close the mold, stretch and blow under low pressure and high pressure, exhaust, open the mold.
Step 4. The finished bottle is taken off by automatic discharging system
PET bottle 6-cavity blowing machine