Ads by Google
BLOW MOULDING MACHINE
Our machine have some advantages as following:
1.we use refulx throttle valve to make machine more steady. 2.we use two tie rod so that it is not easy make mould platen transshape when the blow pin push down. 3.we enlarge the distance from oil pipe to valve platen.so that it is not easy make oil pipe broken. 4.Usually in market machine.big pump and small pump can be Convert .the disadvantage is the clamping will no have way to control as soon as the valve have any problem.but our big pump control move mould and open mould.small pump control clamping mould.no have this disadvantage. 5.enlarge the connect size of Inflatable head so that make cooling effect good. 6.We make machine frame by ourself.our frame is more stronger.SPECIFICATIONS | UNITS | JWB70D |
Max container capacity | L | 5 |
Number of die heads | Set | 1,2,3,4 |
Out put ( dry cycle ) | Pc/hour | 1000 |
Machine dimension (L*W*H) | M | 3.3*2.3*2.6 |
Total weight | Ton | 5.8 |
CLAMPING UNIT | ||
Clamping force | KN | 68 |
Platen opening stroke | mm | 200-500 |
Platen size | mm | 330*370 |
PRODUCT FROM OUR MACHINE:
DETAIL PARTS OF MACHINE:
Automatic blow moulding machine