1,used in cosmetics,chemicals,medical,feeding etc.packing. 2,Injection Stretch blow molding machine (injection+blow) 3,PET,PP

One step molding machine has the advantage that flexible and high effective four station process.

Because one step molding machine can use the heat which is kept in perform molding process effectively, so total of used power is much lower than two steps molding machine, the freedom of molding is higher, it would be much suitable for special shape container or other material container accept PET material to produce out high quality bottles.

Definition of direct temperature control method:

Melted resin into the mold cavity, preform molding directly adjust the temperature at the same time, you do not need to reheat process, extrusion blow molding station to move as soon as possible.

Bottle embryo retains heat, temperatures peaked at this point before on its surface temperature distribution of preform under the most appropriate State extrusion blow molding.

Therefore, forming production of high added-value products can be stabilized, but also more economical.

Technical Specification:

  

  

NO	Item	Unit	Data
01	Screw Diameter	mm	30
02	theoretical injection capacity	G	128
03	injection clamping force	KN	120
04	blow clamping force	KN	30
05	motor power	Kw	11
06	heater capacity	kw	5.8/4
07	operationg air pressure	MPA	0.7-0.9
08	blowing pressure	mpa	2-3
09	cooling water	bar	1-3
10	dimension of machine	cm	300*128*285
11	machine weight(about)	kg	3000
12	suitable materials	PET\PP

JG-120 injection stretch blow molding machine (ISBM)