Blow moulding machinery is applicable for thermoplastic such as PET, PE and PP, widely used in pharmaceutical, health care, etc.

ISBM-120 Automatic Injection Stretch Blow Molding Machine Technical Parameter 

General parameter Applicable material:  PET, PC, PP, PA etc. Nominal capacity:  900bottles/hr  (PET, 16g, 4 cavities for each mold)                            Capacity is subject to bottle type, weight to great extent Screw diameter:  Φ40mm Length/dia. ratio of screw:  20:1 Max. theory injection volume:  120cm³ Max. injection velocity:  98cm³/s Max. injection pressure:  120MPa Max. plasticization:  12g/s Screw rotating speed:  0-170rpm Barrel heating power:  10.3kW Hot runner heating power:  4 kW-5kW  (According to the number of cavity) Injection core closing force:  130kN Injection core stroke:  250mm Die lip closing force:  130kN Die lip stroke:  205mm Blowing mold closing force:  130kN Blowing mole stroke:  75mm+75mm Temp. regulating core stroke:   250mm Temp. regulating tank stroke:  230mm Tank heating power:  1-2kW  ( According to the number of cavity ) Product ejection stroke:  170mm Pressure of oil system:  16MPa  (max) Oil pump motor power:  18.5kW Oil pump flowrate:  105L/min +55L/min Total power:  34kW  (The parameter differing on the number of cavity) Working power:  55% approx.  (The parameter differing on the type of product) Overall dimension:  4100mm×1000mm×3000mm  (L×W×H) Weight:  approx 4.2 tons

Blow moulding machinery ISBM-120