Smart Card Module Personalized Data Writer YLG-E
For watching the video clip of this machine, please visit our official website:
Smart card personalized data writer YLG-E is applicable for writing the sequential requirement data such as smart card personalized data on both 2-chip card and 1-chip card, and it can also mark or engrave the card body with two laser units. The equipment is developed with module design
Basic Configuration32 programming stations (YLD-A1.0 Reader);YL Intelligence control system;Double input and output Magazines 4*500 ; 1 defective Card Station;1 flip before Laser Marking Station;1 Turning pan with 6 buffers for Re-arrangement (for re-writing cards );2 sets of laser units with cooling system and air clean system 2 Industry Computers (motion control and Data control)1 TPLINK (24 interface)
Speed and downloading time (for 2-chip card)
X axis is time,Y axis is speed,the time at inflexion is 8.8s. when the downloading time is 24.8s,the speed is 2000 cards/h.
Speed and laser marking time (for 2-chip card)
X axis is time,Y axis is speed,the time at inflexion is 0.4s,when the marking time is 1.6s,the speed is over 1800 cards/h.
Technical parameters:Device Dimension(L×W×H: 3.45m×1.0m×1.75mWeight: about 800kgPower supply: 220V(-5%~+10%),50Hz 3Kw(Main Device),3.6Kw(Laser)Power duty: About 30%;Air supply 0.5Mpa 10L/min
Smart Card Module Personalized Data Writer (card personalization,card personalizing ,IC card personalization,smart card person )