Ads by Google
Honeycomb rotor dehumidifier comprises a slow rotating honeycomb dehumidifying rotor. The honeycomb rotor is divided into dehydration, regeneration and cooling zones. As humid air flows in the dehydration zone, moisture content deposits on the silica gel surface of the rotor, the dry air is delivered by the fan to the outlet. When the dehydration zone becomes saturated, it is slowly rotated by the reduction motor to the regeneration zone. Regeneration air, heated to180°C blows in reverse direction and removes the moisture content out of the rotor. The regeneration zone resumes dry condition air. Then it is rotated to the dehydration zone again. The continuous cycle of dehydration, regeneration and cooling make it possible to create a steady dehumidifying effect which is in great contrast to other uneven and energy consuming processes.
Advantages
1) Stable dew point
Stable dew point below -40°C to improve the instability of Dew Point curve of the Particles filter type dehumidifier and Particles filter rotor type dehumidifier.
2) No Pollution, Ensure Plastic Quality
a) Have improved the problems of flow, detachment and scattering of dehumidifying capabilities due to the use of LICL based dehumidifying agent.
b) Silicone-based chemical agent prevents the problem of lowering efficiency as seen in the submerged rotor.
c) The new system has improved the defect of having materialized particles sucked by dry air into the dehumidifying drum, as seen in the particles filter and rotor type dehumidifier.
3) Large Absorption Surface, Least Pressure Loss
Every kilogram of particle filter can provide as much as 700m2 surface; The maximum surface area of honeycomb rotor can reach 3000m2; Thus allowing maximum absorption surface and lesser dehumidifier size. The honeycomb structure comes with a lot of small holes , which may let air get through freely without extra burden on the unit, and improve unwanted energy loss.
4) Low Energy Consumption with High Efficiency
The thickness of the honeycomb rotor’s core is only 0.22mm, so dehumidification and regeneration is very fast. The regeneration temperature 180°C saves more than 40% energy than the traditional regeneration temperature 230"'C and saves 2/3 energy than the traditional hot air.
5) Long life and washable
The rotor is made of ceramic-based fiber, which can withstand high acidic and alkaline level and the resulting decay, as well as l000"C of temperature to prevent fire hazard. Since the agent is in long molecular formal, it is washable by water and solution without affecting its durability. It carries an average life of 10 years.
Honeycomb rotor dehumidifying dryer