HKT variable pump drive injection molding machine is precision and energy-saving series by GuangSu, assumers perfect combination of GuangSu state-of-the-art machine processing together with internationally advanced variable pump control technology.
This type of injection molding machine adopt high responsive proportional variable pump system thus to enable the high mach of power between hydraulic output and machine effective operation which avoids energy loss from high pressure throttle flow. Compared with normal constant pump drive machine, the variable pump drive machine is able to save electric power consumption by 30% up to 50%.In addition, the machine less heating enables save of cooling water by 30%, debasing peripheral noise and extension of service life of hydraulic sealing parts and oil to minimize operation and maintenance cost and meanwhile to meet the strict international environment protective policy.
HKT Series variable pump drive injection molding machine is sure to bring for customers incomparable cost efficiency advantages.
The key advantages of HKT series plastic injection machine:
Save of energyHigh speed system response and short molding cycleLargely decrease system oil temperatureReduce mold open and close crash to extend service time of machine and mold tool.To extend service life of oil piping system, to reduce maintenance possibilities and save maintenance cost.Higher requirement for hydraulic oil; provides with imported high quality oil strainer.HKT-0666P Auto Plastic Zipper Slider Horizonal Casting Machine(130T) | ||||||
INJECTION UNIT | Screw Diameter | mm | 38 | 42 | 45 | |
Theoretical Injection Volume | cc | 215 | 263 | 302 | ||
Injection Weight(PS) | g(oz) | 196 | 239 | 274 | ||
Max.Injection Pressure | Mpa(kgf/cm2) | 193 | 158 | 138 | ||
Injection Rate | cc/sec | 97.18 | 118.68 | 163.74 | ||
Injection Speed | mm/s | 100 | ||||
Screw Speed Rotation | r.p.m | 0-180 | ||||
Nozzle Out From Platens | mm | 50-150 | ||||
CLAMPING UNIT | Clamping Force | KN(tf) | 1274(130) | |||
Clamping Stroke | mm | 380 | ||||
Min.Mold Thickness | mm | 150 | ||||
Max.Opening | mm | 380 | ||||
Distance Between Tie Bars | mm | 410*410 | ||||
Max Mould Size | mm | 410*410 | ||||
Ejector Force | KN(tf) | 42 | ||||
Ejector Distance | mm | 0-200 | ||||
| System Pressure | Mpa(kgf/cm2) | 17.5 | |||
Oil Tank Capacity | L | 200 | ||||
Electric Power | KW(HP) | 11 | ||||
Heater Power | KW | 7.7 | ||||
Machine Dimensions (L*W*H) | m | 4.6*1.2*1.8 | ||||
Machine Weight | tf | 4600 |
Plastic extruders machine