This machine can make the PVC plastic windows and doors windows and doors
Refers to the overseas newest technology, carries on the optimized design to the unit, the advantages are plasticizing to be even, the shear rate is small, the output is high service life long and so on. This unit is made up of cone-shape double screw rod extruding machine, the vacuum finalizes, tractor, cutter, laminator, turns material and so on. The main engine uses the import frequency changer velocity modulation; the temperature control unit table uses the Japanese RKC product. The auxiliary engine vacuum pump and the hauling electrical machinery use the quality product, maintains easily. Also may squeeze out the simulation woodenly to become spongy directly the different molding, the effect is better than the single screw rod. Models the steel windows and doors different molding production line to use for parts the awl double extruding machine, May process the PVC plastic windows and doors windows and doors different molding, the steel models the compound different molding, the heterogeneous electric cable porous threading tube, the decoration molding etc.
| model | YF180 | YF240 |
| Expressed the vacuumdegree (mega bar) | -0.08~0.09 | -0.08~0.09 |
| installs the moldthe T die center distance (mm) | 320 | 320 |
| height from groundto model install face(mm) | 890~1100 | 890~1100 |
| moving distanceof vacuum molding(mm) | 400 | 500 |
| speed of traction(r/s) | 0.3~7.8 | 0.1~4 |
| Force of traction (kilo Newton) | 7.5 | 30 |
| effective traction length (m) | 1.0 | 1.8 |
| support on bothsides block width(mm) | 180 | 240 |
| caterpillar bandopening and closing(mm) | 110 | 140 |
| saw blade cutting link (r/s) | 58.6 | 58.6 |
| cut the biggest section (mm) | 180×65 | 240×65 |
PVC profile production line
