Ads by Google
3-LAYER ABA CO-EXTRUSION BLOWN FILM EXTRUDER
Product Model:
SJ55 ×30+ SJ55 ×30-FMS1200(A+B+A)
SJ45 ×28+ SJ55 ×30-FMS800(A+B+A)
3-Layer ABA co-extrusion blown film machine can use HDPE/LDPE materials and the mixture of HDPE and LDPE materials with calcium carbonate and recycled materials.Through multi-layer co-extrusion,it can greatly improve the physical toughness and quality of the film , reduce cost consumption and play a hygeian and environmentally benign role.The film can be used to make various T-shirt bags and flat-end bags.
Technical Parameter:
Specification Model | SJ55×30+SJ55×30 -FMS1200(A+B+A) | SJ45×28+ SJ55 ×30-FMS800(A+B+A) |
Screw Diameter(mm) | AØ55/B Ø55 | AØ45,BØ55 |
Screw Ratio(L/D) | 30:1 | 28:1&30:1 |
Heater Capacity(kw) | 30 | 20 |
Driving Motor Power(kw) | A18.5KW/B22KW | A15KW/B18.5KW |
Temperature Controller Panel | 11zones | 11 zones |
Take-up Roller With (mm) | 1200 | 800 |
Take-up Power(kw) | 0.75 | 0.75 |
Take-up Speed(max.m/min) | 0-80 | 0-80 |
Die Diameter(mm) | (Ø)120(A+B+A) | (Ø)100(A+B+A) |
Air Blower Power(kw) | 4 | 4 |
Film Width (mm) | 400-1000 | 160-700 |
Film Thickness(mm) | 0.02-0.10 | 0.02-0.10 |
Extrusion Output (kg/h) | 100 | 90 |
Assembling Dimension(L×W×Hm) | 6×3×6 | 5×2×5 |
All these technical parameters can be varied with customers’ request. No further notice for any variation. | ||
Optional equipment:1.Autoloader 2.Corona treatment 3.Air compressor
4.Air-cooled chiller
ABA 3 layer co-extruder