YD-S5L Single Station Blow Molding Machine for 2L 5L
YD-S5L Single Station Blow Molding Machine for 2L 5L
Clamping---------Single station+Hight-precision guide+large arm cylinder axleExtrusion system--Hard gear surface reducer+Japan inverter Die system--------Central-incoming extrusion die with special steel Hydraulic system--Japan hydraulic valve seal and proportional control Control system----Japan PLC+Imported HMI+PLC automatic
Advanced processing equipment: Introducing advanced technology form Germany,Italy,Japan etc. Involving advanced design and production of super large-scale blow-molding machine and engineering management capability. Holding over 40 items Patent Technologies.General Infomation | YD-S2L | YD-S5L | YD-S12L | YD-S2L/T | YD-S5L/T | |
| Max.Product Volume(L) | 2L/1-1L/2 | 5L/1-2L/2-1L/3-0.6/4 | 12L/1;5L/2 | 2L/1 | 5L/1 |
Dry cycle(pc/h) | 800 | 750 | 800 | 800 | 750 | |
Screw Diameter(mm) | 50 | 60~70 | 70 | 30+50 | 30+60-70 | |
Screw L/D ratio | 24~25 | 24~25 | 24-25 | 24-25 | 24-25 | |
Screw motor power(kw) | 11 | 15 | 22-30 | 3.3+11 | 3.3+15 | |
Screw heating capacity | 3~4 | 4.8~7.5 | 6.2-8 | 4-6.5 | 6-9.8 | |
No.of heating zone | 3 | 3 | 3 | 3 | 3 | |
Output of HDPE(KG/H) | 30~40 | 50~70 | 100-130 | 30-40 | 50-70 | |
Oil pump driver power | 7.5 | 7.5 | 11 | 7.5 | 7.5 | |
Clamping force(KN) | 38 | 60 | 110 | 38 | 60 | |
Mould Stroke | 138~368 | 148~508 | 300-700 | 138-368 | 148-508 | |
Useful mould platen size | 300~320 | 370~390 | 500*500 | 300*320 | 370*390 | |
Max Die diamater(mm) | 90 | 145 | 220 | 90 | 145 | |
Die heat Capacity(kw) | 2.8~3.5 | 3.5~4.3 | 4.4-4.5 | 2.8-3.5 | 3.5*4.3 | |
Blowing pressure(mpa) | 0.6 | 0.7 | 0.7 | 0.6 | 0.7 | |
Air volume | 0.4 | 0.6 | 0.6 | 0.4 | 0.6 | |
Cooling water pressure | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | |
Size of machie(m) | 2.4*1.6*2.18 | 2.84*1.78*2.6 | 3.3*3.3*2.6 | 2.4*1.6*2.18 | 2.84*1.78*2.6 | |
Weight of machine(Ton) | 3.1T | 5.8T | 7.8T | 3.1T | 5.8T |
YD-S5L Single Station Blow Molding Machine for 2L 5L