1.Size:1.52x30m/roll tinted film 2.Thickness:0.25mm 3.Rang of temperature:500degree-600degree 4.weight is 24.5kg Detailed Product Description 1.Size:1.52x30m/roll tinted film 2.Thickness:0.25mm 3.Rang of temperature:500degree-600degree 4.weight is 24.5kg 5.with fre  

tinted film for car vinyl film sticker 30meter length

 

----Size: 1.52x30m/roll

----Thickness: 0.25mm

----Rang of temperature: -25°C to +150°C

----Meas/Ctn: 15x15x155cm

----G.W./Ctn: 24.5kg

----Release paper: 120gsm air free bubbles double PE blank backside.

----Durability: indoor 4-6year, outdoor 3 years.

Features:

----Strong self-adhensive and can be applied to any smooth surface.

----Stand up against water, dirt, grease, salt, weak acids oil.

----Easy cleanable with simple soap and water.

----COULD BE DRY PASTE.

----Easy air bubbles removale.

----Stretchable with heat.

----Easily install and tear up.

Tips for installation:--Cleaning the surface of vehicle.Air releasing channel makes it bubble free during application.--As products are produced with high flexible PVC film, this makes its suitable for arch and irregular surfaces.When meet the wrinkles and the curve place,Please use heat gun or hair dryer.--Using a soft rubber squeegee will help smooth out bubbles and wrinkles Don't install outdoor at too low temperature or don't drive outside immediately after installation.Don't clean your car within 48hours after installation.

Installation Tips:      Cleaning the surface with rubbing alcohol prior to installing the vinyl will help with adhesion     and clean any contaminants that may cause imperfections.       Using a heat gun can aid in the installation by making the vinyl more pliable and also help    remove wrinkles       Using a soft rubber squeegee will help smooth out bubbles and wrinkles      

Application: Carbon fiber modification on engine hood,empennage, surrounding surface

    

new chameleon vinyl 3d carbon air bubble free 1.52*30m roll