This PP PE granulating line is ideal equipment for recycling plastic waste such as plastic film, silk, sheet (below 0.5m) etc.

This PP PE Gruanulating production line is with new design, reasonable composition, steady operation, easy to maintain, low noise and low consumption. Fitting material: PE, LDPE, HDPE raw material

The thickness of the waste material: Less than 0.5mm.

The waste material should not be with oil dirt, metal and other sundries. For the capacity, usually 200-1000 kg/h. It is according to your request.

NEW

1.         PP, PE Production Line adopts the European advanced technical of plastic machine, after our many years efforts, the whole line have get an ideal pelleting effect.

2.         The production line is mainly comprised of following machine: force feed system, single-screw extruder, hydraulic net change device, water cooling pelleter, vibration sieve, centrifuge, storage hopper, control panel etc.

3.         The production line adopts different filling methods according to difform materials; screw configuration will be designed by different nature materials.

4.         Advantage: the production line is able to remove the dross better by one or many net changing; water cooling pelleter greatly promote the appearance of particulate; air conveying drying system reduce the moisture content of the final particulate greatly.

5.         Output: 100-500kg/h.

PE PP Granulating Production Line