Feature:
It is mainly used negative rear angle dual-toggle unit and full computer control and dual proportional load.
It is the stable after more tens years excelsior research and producing in the series injection machine.
There are severial model injection machine has the honour of national important new production.
specification | FTN90 | |||
INJECTION UNIT | A | B | C | |
Screw Diameter | mm | 32 | 36 | 40 |
Screw L/D Ratio | L/D | 24.7 | 22 | 19.8 |
Shot Size (Theoretical) | cm3 | 126 | 160 | 197 |
Injection Weight(PS) | g | 115 | 146 | 179 |
Injection Rate | g/s | 75 | 95 | 117 |
Plasticizing Capacity | g/s | 14.2 | 18 | 22.2 |
Injection Pressure | Mpa | 234 | 185 | 150 |
Screw Speed | rpm | 0---245 | ||
CLAMPING UNIT | ||||
Clamp Tonnage | KN | 900 | ||
Toggle Stroke | mm | 320 | ||
Space Between Tie Bars | mm | 360×360 | ||
Max .Mold Height | mm | 330 | ||
Min .Mold Height | mm | 110 | ||
Ejector Stroke | mm | 90 | ||
Ejector Tonnage | KN | 28 | ||
Ejector Number | PC | 5 | ||
OTHERS | ||||
Max .Pump Pressure | Mpa | 16 | ||
Pump Motor Power | Kw | 11 | ||
Heater Power | Kw | 6.5 | ||
Machine Dimension(L×W×H) | m | 4.2×1.2×1.6 | ||
Machine Weight | t | 3 | ||
Hopper Capacity | Kg | 25 | ||
Oil Tank Capacity | L | 220 |
plastic Injection molding Machine