plastic injection molding machine for plastic 1.the clamping force is 40T 2.injection weigh is120g 3.the platen size410x250mm

NINBGO TAAI PLASTIC INJECTION MOLDING MACHINE FOR PLASTIC PARS

1. The lower die is fixed and the upper die is moveable which is fit for the injection moulding of the inlaid pieces.   

2. The design of vertical compression typed master/slave clamping cylinder, high-speed and low-pressure matched die and multiple pressure control increase the servie life of die and have a high safety.        

3. Injection pad can up and lift automatically, which is covenient for the installation of die and the cleanout of raw materials.    

4. The injection and charging system adopts a vertical design, clamping system is installed in the lower part of the machine. The structure is solid and simple and does not occupy the space.              

 5. Four column full hydraulic clamping, can be heightened the thickness of the die and increased the height of mould.            

 6. Adopt computer liquid crystal display (LCD), which can display the function clearly and precisely. It can also store 68 groups of moulding parameters at random

Machine   Type	Unit	TA-400/S/DS/LS
Screw Diameter	mm	32	35
Injection   Pressure	kgf/cm²	1483	1240
Theoretical   Injection Volume	cm³	121	144
Max.Shot   Weight(PS)	g/oz	110/3.9	131/4.6
Injection Rate	cm³/sec	63	74
Number Of Temperature Control	zone	3
Clamping Force	kn	400
Distance   Between Tie Bare	mm	410x250
Top Platen   Size	mm	555x380
Bottom Platen   Size	mm	580x420
Sliding Platen Size	mm	S:396x420
		DS:396x840
		LS:396x420
Min.Mold   Height	mm	195
Opening Stroke	mm	200
Max.Opening   Distance	mm	395
Nozzle Center   Heignt	mm	—
Nozzle Center   Distance	mm	—
Ejector Force	kn	22
Ejector Stroke	mm	35
Max.Hydraulic   Preesure	kgf/cm²	140
Oil Tank   Capacity	L	180
Pump Motor   Power	(Hp)kw	(7.5)5.5
Barrel Heating   Power	kw	3.3
Total Wattage	kw	8.8
Machine Weight	kg	1600
Machine   Dimensions	cm	170x100x235

full auto 40T plastic injection molding machine for plastic parts