Specification Table | XY1280 | ||||
A | B | C | |||
Injection Unit | Screw Diameter (mm) | 42 | 45 | ||
Screw L/D Ratio (L/D) | 20 | 18.5 | |||
Shot Size(Theoretical) (cm³) | 221 | 256 | |||
Injection Weight ( g) | 205 | 238 | |||
Injection Rate (g/s) | 110 | 120 | |||
Plasticizing Capacity (g/s) | 19.5 | 23 | |||
Injection Pressure (Mpa) | 204 | 167 | |||
Screw Speed (rpm) | 220 | ||||
Clamping Unit | Clamping Force (KN) | 1280 | |||
Toggle Stroke ( mm) | 360 | ||||
Space Between Tie-Bars (mm) | 415*375 | ||||
Max.Mould Height (mm) | 400 | ||||
MIN.Mould Height (mm) | 150 | ||||
Ejector Stroke (mm) | 120 | ||||
Ejector Tonnage (KN) | 40 | ||||
Other | Max.Pump Pressure (Mpa) | 16 | |||
Pump Motor Power (KW) | 11 | ||||
Heating Power (KW) | 6.3 | ||||
Machine Dimensions(LxWxH) (m) | 4.4*1.36*1.8 | ||||
Machine Weight(Approximate ) (t ) | 3.8 |
plastic autoparts macking machine