Plastic Injection Molding Machine using Servo Motor
Model: KC130M8
Clamping Unit
1. Box mould platen design
2. 5 Points vertical double toggle mechanism
3. Hydraulic motor drive the gear to adjust the mould thickness
4. Precision, low pressure and fast mould adjustment
5. Low-pressure mold protection
Injection Unit
1. Precise screw system with optimized design
2. Double-cylinder balanced injection system
3. Multi-stage pressure and speed injection
4. Back pressure adjustment device
Control Unit
1. World famous brand electric components
2. Large screen LCD
3. Dynamic monitor of machine operation
4. 100 moulding data system
5. Sensitive errors indication and alarm function
6. Liner displacement transducer controls injection, clamping, ejection.
Hydraulic System
1. High-response hydraulic system design
2. Pressure and flow proportional control
3. World famous brand hydraulic components.
Description
Model: KC130M8
Injection Unit
Screw Diameter (mm): 36/42/46
Screw L/D Ratio (L/D): 23/20/18
Shot Volume(Theoretical) CM3: 193/263/316
Injection Weight (g): 181/246/295
Injection Rate (g/s): 88.2/120/114
Plasticizing Capacity (g/s): 10.5/11.2/12
Injection Pressure (Mpa): 215/158/132
Screw Speed (rpm): 220
Clamping Unit
Clamp Tonnage (KN):1300
Toggle Stroke (mm): 380
Space between tie bars (mm): 410X410
Max. Mold Height (mm): 430
Min. Mold Height (mm): 150
Ejector Stroke (mm): 120
Ejector Tonnage (KN): 42
Others
Max. Pump Pressure (Mpa): 17.5
Pump Motor Power (KW): 11
Heater Power (KW): 8.9
Machine Dimension (M): 4.6*1.2*1.8
Machine Weight (T): 4.6
Plastic Injection Machine using Servo Motor