48 cavities injection machine 1.High-Productive 2.High-Efficient 3.High-Precise 4.High-Reliable

48 cavities injection machine

 

 

1. High-speed CPU based Siemens SP300 control system with Operator-friendly interfaces assures auto-protection function of machine and automatic process control.

2. Profibus-DP communication module allows for instantaneous response and precise control of the machine hydraulic system and robot.

3. Accumulator from REXROTH provides adequate hydraulic force.

4. Independent BOSCH servo-valve control of mold clamping, ejection and injection contributes to instantaneous, stable and precise machine movements.

5. Accurate control of mold stroke prolongs mold life.

6. Specially designed take-off plate shortens robot stroke.

7. SEW servo motors from Germany for the robot leads to fast and accurate control of robot stroke, which in turn shortens preform transfer time as well as extending machine life.

8. Higher machine rigidity with thicker platens and heavier machine platform enables the machine to run fast but stable.  

9. Preform can be accepted in accordance with peform drawing confirmed.

 

PET  preform Injection machine

Model			TP-32PET	TP-48IVPET	TP-56IVPET
Injection Unit	Screw L/D ratio	L/D	25	25	25
	Screw Diameter	mm	85	100	120
	Injection Pressure	Kgf/cm²	1080	907	907
	Machine size (L*W*H)	Mm	8450×3590×2160	9410×4380×2400	9410×4380×2400
	Shot Volume (Max.)	cm³	1700	2850	2850
	Shot Weight	g	2040	3420	3420
		ors	72	121	121
Clamping Unit	Clamping Force	Ton	280	320	320
	Clamping Stroke	Mm	545	500	500
	Mold Thickness (min/max)	Mm	280~700	480~780	480~780
	Tiebar Spacing (W*H)	Mm	610×610	660×860	660×860
	Ejector Storke	Mm	150	180	180
	Ejector Force	Ton	8	13	13
	No.of Ejector Pins	Piece	5	11	11
System Pressure (max)		Kg/cm²	140	140	140
Preform Mold	Caviation (max.)	Piece	32	48	56
	Preform Length (max.)	Mm	190	190	190
	Hot-runner	Pneumatic Valve-gate Hot Runner Mold
Robot	T/O Tubes	Piece	96	144	168
Installation Power	Pump Motor Power	KW	45	45+75	45+75
	Robot Power	KW	10	25	25
	Mold Heating	KW	38	42	44
	Machine Heating	KW	37	71	71
	Total Power	KW	130	258	300
General Requirements	AC Power(3 Phase 4 Line)	V	380	380	380
		°C	5~15	5~15	5~15
	Chilling Water	Mpa	0.8	0.8	0.8
		L/min	420	600	600
		°C	below25	below25	below25
	Cooling Water	Mpa	0.25	0.3	0.3
		L/min	100	200	200
Notes: A: Recommended chilling water temperature is 5-15°C   B: The data are subject to change for contineous improvement in technology

48 cavities injection machine