plastic injection moulding machinery
|
| DS--100T | ||
| Unit | A | B | |
Injection Unit | Screw Diameter | mm | 35 | 38 |
Screw L/D Ratio | L/D | 20 | 18.6 | |
Shot Size(Theoretical) | cm3 | 155 | 190 | |
Injection Weight | g | 138 | 168 | |
Injection Pressure | Mpa | 170 | 181 | |
Plasticizing Capacity | g/s | 11.7 | 12.3 | |
Screw Speed | rpm | 0-220 | ||
Clamping Unit | Clamp Tonnage | KN | 1000 | |
Toggle Stroke | mm | 305 | ||
Space Between Tie Bars | mm | 355*315 | ||
Max.Mold Height | mm | 350 | ||
Min.Mold Height | mm | 150 | ||
Ejector Stroke | mm | 70 | ||
Ejector Tonnage | KN | 27 | ||
Ejector Number | PC | 1 | ||
Others | Max.Pump Pressure | Mpa | 16 | |
Pump Motor Power | KW | 9 | ||
Heater Power | KW | 5.3 | ||
Machine Dimesions(L*W*H) | m | 4.0*1.15*1.7 | ||
Machine Weight(about) | T | 2.7 |
1.Due to continuous improvements, we reserve the right to amend any aspect of the above specifications without prior notice.2.When PC,PVC and other plastic material used for engineering, pls inform us for special designation.
DS-100T plastic injection moulding machinery