The specification is as follows :
| Model: TW-1780 | Unit | TW-1780A | TW-1780B | TW-1780C | TW-1780D | |
Injection set | Screw diameter | mm | 42 | 45 | 50 | 55 | |
Draw ratio of screw | L/D | 23.8 | 22.2 | 20 | 18.2 | ||
Cylinder head volume | cm3 | 290 | 330 | 410 | 495 | ||
Shot weight | g | 265 | 300 | 370 | 446 | ||
Injection rate (PS) | g/s | 115 | 131 | 162 | 196 | ||
Plasticizing rate (PS) | g/s | 26 | 32 | 38 | 42 | ||
Injection pressure | p | 228 | 199 | 161 | 133 | ||
Screw speed | m | 190 | |||||
Clamping set | Clamp force | KN | 1780 | ||||
Max.mould opening stroke | mm | 435 | |||||
distance between tie bars | mm*mm | 470*470 | |||||
Min.mould thickness | mm | 190 | |||||
Max. Mould thickness | mm | 500 | |||||
Ejector stroke | mm | 130 | |||||
Ejector tonnage | KN | 53 | |||||
Ejector number | piece | 9 | |||||
General | Rated pressureof oil pump | Mpa | 16 | ||||
Pump motor power | KW | 18.5 | |||||
Heating capacity of screw cylinder | KW | 10.5 | |||||
Oil tank capacity | L | 315 | |||||
Machine weight | T | 6 | |||||
Machine dimension(L*W*H) | m | 4.78*1..26*2.03 |
plastic injection machine