Ads by Google
rubber extruder using screw and barrel
main technial standards:
Item | screw and barrel |
screw type | hot feeding screw,cold feeding screw |
Material | 38CrMoAIA |
Tempering hardness | 240-280HV |
Nitride layer thickness | 0.5-0.8mm |
Nitride brittleness | <= Grade 2 |
Surface Roughness | Ra0.4m |
Screw Straightness | 0.015mm |
Note:The screw is via the heat treatment,nitriding treatment,high-frequency quenching,Spray-coating the bimetallic layer. |
rubber extruder using screw and barrel