Ads by Google
Automatic Robotic Arms AB1000WD/SY1)
AB series robot arm is applicable to all types of horizontal injection machine of 50~450T for take-out products. The installation direction is different from traditional beam robot, products and sprues are placed at the end of IMM. It has single stage and telescopic type; It can be added a sub-arm for 3-plates mold to grip products and sprue at the same time, vertical stroke: 600-1000mm. Install VANTAGE robot can save 30~40% room to allow better utilization of production space; Furthermore, the productivity will be increased 20~30%, reduce defective rate, ensure safety of operators, reduce manpower and accurately control the output to reduce waste.
General Specification
Power Source | Working Pressure | Max.Allowed Pressure | Drive System | Swivel | Control System |
3?AC220v±10v 50/60HZ | 5kgf/cm2 0.49Mpa | 8kgf/cm2 0.8Mpa | Y AC Servo Motor X,Z Pneumatic Cylinder | 90°Fixed Pneumatic |
HA80
|
Main Specification
Model | AB650 ID/IS/WD/WS | AB850 ID/IS/WD/WS | AB1000 WD/WS |
Power Capacity(KVA) | 1 | 1 | 1.5 |
Recommended IMM(ton) | 50-150 | 100-250 | 250-450 |
Traverse Stroke(mm) | 2000(2500) | 3000(3500) | 4000(4500) |
Crosswise Stroke(mm) | P:150 R:100 | P:300 R:100 | P:400 P:100 |
Vertical Stroke(mm) | 600(750) | 850(950) | 1050(1150) |
Max.loading(kg) | 5 | 5 | 8 |
Dry Take out Time(sec) | 2 | 2.2 | 2.5 |
Dry Cycle Time(sec) | 8 | 10 | 12 |
Air Consumption (nI/cycle) | 21 | 23 | 25 |
Net Weight(kg) | 260-280 | 320-350 | 380-420 |
Gross Weight(kg) |
|
|
|
Product Size(mm) |
|
|
|
Package Size(mm) |
|
|
|
Denote:: ″P″:product arm ″R″:runner arm
I: single stage W: telescopic type D: product arm + runner arm S: product arm
A: remote adjustment of crosswise axis
G: remote adjustment of vertical axis
Automatic Robotic Arms For Injection Machine (AB1000WD/S)