Ads by Google
FD-60A injection machine:
Hydraulic clamping design prevents platen deformation. The clamping force is distributed evenly,the product made inside the mold is accurate and stable.
NO abrasion on pins and bushes, no lubrication needed and no oil contamination, ensure easy maintenance and long working life .
Space between tie-bars and opening stroke are larger than others, suitable for the bigger molds.
CPECIFICATION
Unit | FD-60A | ||||
Injection Unit | Screw diameter | mm | 25 | 28 | 32 |
Screw L/D ratio | L/D | 22.4 | 20 | 17.5 | |
Theoretical shot volume | cm3 | 68 | 86 | 112 | |
Maximum shot weight (PS) | g | 63 | 79 | 103 | |
oz | 2.2 | 2.8 | 3.7 | ||
Maximum injection pressure | kg/cm2 | 2912 | 2321 | 1777 | |
Clamping Unit | Injection rate | cm3/sec | 55 | 70 | 92 |
Plasticizing capacity (PS) | kg/hr | 27 | 36 | 45 | |
Screw torque & speed (HT/LS) | N.m/rpm | 560/277 | |||
Screw torque & speed (LT/HS) | N.m/rpm | 448/350 | |||
Clamping force | ton | 68 | |||
Opening stroke | mm | 450 | |||
Minimum mold thickness | mm | 150 | |||
Open daylight | mm | 600 | |||
Space between tie-bars | mm | 320×320 | |||
Others | Plate dimension | mm | 480×480 | ||
Ejector stroke | mm | 100 | |||
Ejector force | ton | 2.7 | |||
Pump/motor power | Hp(KW) | 15(11) | |||
Hydraulic system pressure | kg/cm2 | 140 | |||
Heater capacity | KW | 4.3 | |||
Oil tank capacity | L | 255 | |||
Machine dimension (Approx.) | m | 4.1×0.9×1.5 | |||
Machine weight (Approx.) | ton | 2.7 |
plastic injection molding machines(FD-60A)